Halo Easi Build 15ml Dare To Bare Peach

1. Apply the Halo Basecoat and avoid flooding the cuticle area and the nail walls, once this is done cure for 30 seconds.
2. Apply a slick layer of Easi Build on the nail. This will help guide the building to the correct place on the nail bed.
   
3. Apply a building layer directly on top of the slick layer.
4. If it flattens then hold your hand upside down to help achieve the shape again then cure for 60 seconds.
   
5. Repeat the step if you do not have your desired shape.
   
6. Once this has been done cure under the light.
   

Finish

1. Fine your nails with a 180 grit nail file, to help refine the shape of the nails and the length and surface.
2. Buff your nails to give them that smooth effect.
3. Remove any leftover dust.
4. Follow with your favourite Halo gel polish, if you wish.
5. Apply the Halo Gel Polish Topcoat.
6. Cure for 30 seconds.

Tip

• To avoid getting a heat spike, hold your hand a few inches out of the light for about 10 seconds. This helps the gel to cure slowly.
• If you're using a lamp with a hot setting then please follow the lamp instructions.
  

Removal:

1. Gently buff the shine from the Halo Gel Builder that has been applied, with a buffer.
2. Soak a lint-free wipe with acetone remover, and apply it around your nails.
3. Once it is applied around your nails, wrap it with nail foil.
4. Wait for 5-7 minutes.
5. Remove the foil and simply slide off any excess gel polish there may be with a manicure stick.